Fencing Banners
Canvas prints and outdoor banners for your fencing is the best solution to decorate your garden and make the grey block work look better. Mesh banners for the fences and gates is a new conception which allows you to change the look of cemented walls without any builders help and massive outlay.
The structure of the raw material for beautification of fences of different complexity and raw materials is simple.
The Mesh Banner on the fences is presented in the form of a stretch canvas, which with ease It is mounted on any surface of the site fencing. The Mesh Banner visually looks the same as advertising banners.
Only recently they were decided to try to use as a material for decorating a hedge.
And this idea was successfully adopted by many owners of private gardens. After all, there is nothing easier than make an amazing fence design using such a Mesh Banner.
What does the Mesh Banner of?
The basis of the material is a network of reinforced polymer structures. Cells in construction canvases are almost invisible, since they are no more than one or two in diameter millimetre;
The picture is applied to the network using photo printing.
Such a simple material allows you to embody completely unexpected and bright ideas in the process.
Advantages:
Such material as a Mesh Banner is not just applied. This type of hedge design is filled benefits such as:
- Easy installation.
Even the one who can never face with such types of work.
- A variety of assortment.
Using this option to transform a hedge, you can choose lots of ideas. Such canvases can depict the Garden of Eden, waterfalls, exotic landscapes, flower beds. Any of these images will create the illusion that this is all a reality, and not just a picture.
- The surface is easy to clean.
If any dirt appears, it is enough to wipe it with soft cloth. If the dirt just does not wipe, then you can use the standard cleaning products.
- Due to the cells that are the basis of the structure of the photo grid, the canvas allows air to pass through. It allows you to combine the grid with any type of fence: brick fence, metal fence, fence from foam blocks or cinder blocks.
- The grid can be on the surface of the fence all year round, it is not exposed to impacts weather extremes, climatic conditions. Figure is durable and does not lose its original appearance after rains, hot sun or frost.
- The manufacturer gives a guarantee of 5 years that the drawing will retain its original properties.
As for the Mesh Banner itself, its service life is unlimited.
- The Mesh Banner for fencing facades has an adequate level of fire resistance I.e,
it can be safely left in its place in a moment of intense heat.
The video shows an example of the design of the fence photoset.
Mesh Banner installation
The process of mounting photosets directly depends on the material of the main fence. But in any case, technologies are similar and even beginners will cope with the task. There are several options for fixing Mesh Banner on the basis of the fence:
- In the first embodiment, the network is stretched and fixed with eyelets. Eyelets are rings on which the thread is attached, stretching to the holding structure on the fence. Usually, such rings are sold along with the photoset itself. If they were not included, it does not matter you can buy eyelets at your nearest building materials store. Then a Mesh Banner fixed on professional sheets, and it is possible on sections made of metal, placed between pillar constructions. The mesh is stretched using a cable made of metal, plastic or twine.
- Attach the network around the perimeter by nailing the material with brackets. For this need a construction stapler, which is bought in a furniture store or building materials. The main thing in this version of the mounting photocell, pay attention to the quality of staples.
They must be made of stainless steel. This will avoid damage. photo sockets due to moisture. If the brackets are not quality, then in the future in their places
rust spots may form, which significantly spoil the overall look of the photo grid.
- To stretch the canvas on the base of the fence, you can use screws. The method is elementary
just fasteners nailed photogrid. It is worth paying attention to the quality
self-tapping screws, it is better to choose those in the design of which there are plastic spacers. Fine if
the fastener heads will be transparent so that they do not distract attention from the illusion,
created by drawing on the canvas.
Important notes
The pitch between fasteners should be no more than 100 centimetres. If
photogun picture exceeds the block size of the fence, then you can trim the canvas where it is
need to;
It is best to choose a composition that will look harmoniously surrounded. Although
it's all about the preferences of the owner of the land plot. If desired, applied to
canvas printing of any images that will help to add uniqueness to the product.
Photogrid for trimming the fence - a material that deserves attention. Therefore, it is worth paying for
attention to it, considering the decision about what kind of fence will have.